Bird Feeder, Bird House Poles And Accessories
for

FINIAL
Two Arm
3 piece pole
TWISTER
Baffle

These products are heavy duty, built to last, easy to install, take up and move to another location. They will stand up to heavy winds and will not bend over in wet soils. Very sturdy and dependable.

The Turning Rod is not included with the Twister

FINIAL
Three Arm
3 piece pole
TWISTER
Baffle

These products are heavy duty, built to last, easy to install, take up and move to another location. They will stand up to heavy winds and will not bend over in wet soils. Very sturdy and dependable.

Turning Rod Not Included With Twister

Adjusable 20" wrought iron arm
for FP poles 1" diameter.

All Items Stating With COO Are Compatible

12" Coil arm hook with large radius. Goes on with a twist. No tools required Made of 3/8" stock.

All Items Stating With COO Are Compatible

Description: Bluebird house flange plate that mounts to either the back or bottom of a birdhouse with thumb screw for use with FP poles.

Compatible with: All of our FP poles or any other manufacturer's 1inch od poles.

Size: Two 2 1/2inch L X 2inch W right angled plates welded on a 2inch high steel tube.

Instructions: Screw the flange to the back or bottom of the bird house with the screws provided and place on top of pole. Tighten the flange with the thumb screw.

All Items Stating With COO Are Compatible

For the FP duo, trio & quad.

Description: Decorative plastic finial with swaged end.

Compatible with: All of our FP poles or any other manufacturer's 1inch od poles.

Size: 4inch overall height with 3inch actual height.

Instructions: Slip swaged end into top of the pole.

All Items Stating With COO Are Compatible

Round Steel Rod 2 arm pole top attachment.

Finial topper included.

14'' diameter bath for attachment to FP series 1'' tubular poles and 60 Watt thermostatically controlled 14'' diameter heated plastic dish. Comes with non heated birdbath for use in warm weather.











Note:Non heated bath dish is green instead of orange.

60 Watt thermostatically controlled 14" diameter heated plastic dish only.

BA7W is wire form bird bath dish holder. Comes with D14CL. Goes on with a twist, fits 1” diameter pole.

Note: Bath dish is green instead of orange.

60 Watt thermostatically controlled 14" diameter clamp mount bird bath.

Gray Granite.

$39.95

For 1 inch diameter poles.

Compatible with: All of our FP poles or any other manufacturer's 1" poles.

Size: Attaching Feature 12" Reach.

For FP poles.

Instructions: Slide the squirrel shape to the top of the pole.

For threaded base tube feeders

Description: Pole adapter that makes most threaded-base tube feeders fit our FP poles.

Compatible with: All of our FP poles or any other manufacturer's 1 inch od poles.

Size: 2 3/4inch in height.

Instructions: Screw threaded end of the adapter into the base of the tube feeder and then slide the unthreaded end into the pole.

Feeder actaches to our FP series poles or any 1" diameter pole.

Pole shown apart in 3 sections and put together.

1" diameter.

Over all hieght 80" not including the squirrel on top.

Final Squirrel(COOFINSQ) shown on top of pole sole separately.

Description: 12inch tubular Pole extension piece with a swaged end to fit on FP poles.

Compatible with: All of our FP poles or any other manufacturer's 1inch od poles.

Size: 14inch overall height; actual extension is 12inch.

Instructions: Slip swaged end into any FP pole or 1inch od pole.

Description: Pole extension piece with a swaged end to fit on FP poles.

Compatible with: All of our FP poles or any other manufacturer's 1inch od poles.

Size: 20inch overall height; actual extension is 18inch.

Instructions: Slip swaged end into any FP pole or 1inch od pole.

This Adaptor Will Fit Both 8 & 12 Port Wild Bills Bird Feeders

Mounts on standard 1 1/8" id. pole* (pole not included)

Includes all necessary hardware to pole mount the Wild Bills feeder.

Copper-Tex finish. Holds peanuts, shelled corn or sunflower hearts and seeds. Slots on the back plate for side mounting on nails or screws and can also be pole mounted using the COORUNDTOP.

For any 1" diameter poles.

Green

Our baffled feeder holds two standard suet cakes and is surrounded by sturdy 16 gauge vinyl coated wire mesh with 1-1/2" openings to keep out starlings and squirrels. The top and bottom are powder coated in an attractive green finish.

14"W X 18"H.

Pole mount corncob squirrel platform feeder.

This is a great and tough squirrel feeder that offers hours of enjoyment!

Fits 1/2" to 1" poles.

8"L X 4"W.

Goes on with a twist and is a great way to hang thistle socks and feeders off of our 1' pole

16 inches long

No tools required!

Goes on with a twist and is a great way to hang thistle socks and other feeders. For 1" Pole.

8 inches long

No tools required!

Scoop / Funnel -contents can be poured out either end. Has a magnetic strip on back. Just tip & pour !. Holds up to 2 lbs of seed. Green plastic.

Model # SCUNEL

Description: Patio base for one inch poles made of 1/2 inch round steel rod and 12 gage tubing with brass thumb screw.

Patio Base Compatible with: Any flat surface eg, ground, patio or deck and all of our FP poles or any other manufacturer's one inch poles.

Size: 24inch diameter base with a 6 inch high tube.

Instructions: Set the stand on the chosen location. Place pole in the centered tube and tighten brass thumb screw.

All Items Stating With COO Are Compatible

Description: Heavy duty 1/8inch wall square steel patio base has a 3 5/8inch X 3 5/8inch id to accomodate 4inch X 4inch wood posts.

Compatible with: Any flat surface eg, ground, patio or deck and any 4X4 wood post.

Size: 24inch diameter base with a 5inch high tube.

Instructions: Set the stand on the chosen location. Place post in the centered tube and screw firmly in place with the four large screws provided. Attach feeder to the top.

26 x 26 x 8

Use this pole with stand that can be place on you patio, porch, or deck.

Buy any arm you wish by simply clicking on the picture below. The price below does not include arms

Click here to purchase Patio Base COOPAT1 stand.

Click here to purchas pole.

Click on image below.

Click on image below.


Click on image below.

Buy Both 3 piece pole and Patio Base for Only.

Use this pole with stand that can be place on your patio, porch, or deck.

Buy any arm you wish by simply clicking on the picture below. The price below does not include arms

Click here to purchase Patio Base COOPAT3 stand.

Click here to purchase pole.

Click on image below.

Click on image below.


Click on image below.

Buy Both 3 Piece Pole and Patio Base for Only.

The price at the bottom of the page is for TWISTER only.

This is a great quick way to put up a bird feeder pole in your back yard. I put up one for my wife right outside her kitchen window in less than 30 minutes with three bird feeders, suet feeder and baffle on it. She has had many hours of fun watching the birds feeding and squirrel trying too. They have their own feeders, but like to try eat out of the bird feeders also. Simply screw it in the ground and add poles with 2, 3 or 4 arm attachments The new twister will hold the pole in the ground during high winds and rain. Mine has never leaned since I put it up.

Click on image below.

Click on image below.


Click on image below.



Twist in ground socket for 1" inch diameter poles.Description: Heavy duty 12 gage tubular steel twist in ground socket has a 1 1/32inch id to accomodate our FP poles. 6inch tube is welded to an 8 gage steel post with a coil for easy turning into the ground. TWISTER has 1/2inch turning holes and 5/16inch stainless steel set screws for tightening down the pole. When you use this ground socket you get the entire length of the pole above ground.

Compatible with: Any soil type and all of our FP poles or any other manufacturer's 1inch od poles.

Size: 21inch overall length; 15inch bottom tube with spring, 6inch upper tube.

Instructions: Place the shaft of a large screwdriver or piece of pipe or wood into the 1/2inch turning hole on the TWISTER. Place the coiled end perpendicular to the ground and firmly turn clockwise until the round plate of the socket sits flat on the ground. Insert any 1inch o.d. pole and tighten the set screw.

All Items Stating With COO Are Compatible.

Does Not Include Turn Bar.

Notice! Price below is for Twister only.

Rod used to twist into the ground the TWISTER(COOTWISTER)

Click here to shop for Poles and Accessories.

This is our best patented wrap around squirrel baffel fitting poles 1/2 to 1 inch. I have has one in my back yard and no squirrels have had a free lunch yet except on their squirrel feeders placed on the trees.


Notice! Price below is for baffel only.

For 1/2 to 1 inch Poles

Easily mount even the heaviest of feeders with our 5 piece sectional pole set. Our convenient ground socket, the TWISTER, twists in and out of the ground quickly and easily. Made of heavy duty powder-coated steel.

Heavy duty flange with zinc-plated thumb screw securely fastens feeder to the pole. 16" in ground scocket gives the pole the full height of 74".


These products are heavy duty, built to last, easy to install, take up and move to another location. They will stand up to heavy winds and will not bend over in wet soils. Very sturdy and dependable.

For 1/2 to 1 inch Poles



Flange plate. 5-5/8"L X 3-1/4"W

For 1/2 to 1 inch Poles


Round pole flange plate. 3" diameter.

14" diameter hanging bird bath.

Imported 13.75" Diameter cast aluminum hanging dish (patina green).

Imported 14.5" Diameter hammered copper hanging dish (shown with rock).

Attract fruit loving birds like

• Orioles
• Finches
• Robins

to your backyard.

Simple design will hold four pieces of fruit like oranges and apples.

Durable powder coated finish allows for easy clean.

14" Diameter weather guard made with galvanized powder-coated steel and attractive brass hanging hardware will keep these specialty feeders drier in the rain and snow and shaded in the sunshine. The bright glossy colors powerfuly advertise the location of the feeders to these sought after birds.

Cylindrical squirrel baffle for poles 1/2" to 1-5/8" diameter. 16-3/4" long. 6 1/4" diameter.

Cylindrical raccoon baffle for poles 1/2" to 1-5/8" diameter. 28" long. 6 1/4" diameter.

Description: Cylindrical raccoon baffle made of galvanized steel sheet with collar that fits on poles up to 1 5/8inch in diameter.

Cylindrical Compatible with: Fits on all of our RT series of square, wrought iron poles and FP series of tubular poles plus many other manufacturers' poles as well.

Size: 8inch diameter X 28inch long

Instructions: Slide the circular collar onto the pole at least 4' up from the ground, tighten the screws until it is firmly attached and place baffle on it. Make sure the collar is parallel or level to the ground to allow baffle to sit evenly.